把高风险试飞，关进一块可控场地Contain high-risk flight tests within a controlled space
金属框架与柔性防护网围合出六面封闭空间，高动态与失效模式试飞不必每次申请空域。A metal frame and flexible protective mesh form a six-sided enclosure for dynamic and failure-mode flight testing, reducing the need for separate airspace applications for each test.
自由度测试系统平台用金属框架与柔性防护网围合出一块封闭式飞行测试场地。六面封闭的网笼把高动态、高风险的机动试飞关在可控范围内完成，不必为每一次验证单独划设空域。场地为可拆装结构，运输到场后按流程组装即可投入使用；网笼只负责约束飞行边界，试验数据由舱外的地面设备采集与记录。The flight test platform uses a metal frame and flexible protective mesh to enclose a flight-test area on all six sides. It contains highly dynamic, high-risk maneuvers within a controlled boundary, reducing the need to designate separate airspace for each validation. The structure can be disassembled for transport and assembled on site. The enclosure defines the flight boundary, while external ground equipment acquires and records test data.
| 场地形式Facility | 封闭式金属网笼Enclosed metal cage |
|---|---|
| 适用对象Suitable aircraft | 中小型无人机Small and medium UAVs |
| 验证项目Validation scope | 飞行包线 · 失效模式Flight envelope · Failure modes |
| 结构形式Structure | 可拆装，运输到场后组装Demountable; assembled on site after transport |
笼体由三个关键部位决定强度与使用体验：节点、门体与标识。照片上的标记可以点开，看清那一处的做法。Joints, doors and identification are key to the enclosure's strength and usability. Select the photo markers to see each detail.
方管交接处的焊接节点，是整笼受力最集中的位置。Welded joints where square tubes meet carry the enclosure's most concentrated loads.
侧开检修门。铰链与锁具保证门体在反复开关之后仍然贴合到位。A side-opening access door with hinges and a lock that maintain proper fit through repeated opening and closing.
正面铭牌标注场地名称与使用方信息，多场地并行时不会认错。The front nameplate identifies the site and operator to distinguish multiple installations.
正视图、四分之三侧透视图与俯视图，笼体结构与开合方式一览。Front, three-quarter perspective and top views show the enclosure structure and door operation.
正视图Front view
四分之三侧透视图Three-quarter perspective view
俯视图Top view
场地为整装结构，运输到场后按流程组装即可投入使用，无需在原址浇筑基础。The structure can be assembled after delivery and put into use without casting a foundation on site.
框架件、网面、门体与五金按清单到齐，逐件核对规格与数量。Check frame components, mesh, doors and hardware against the delivery list, verifying specifications and quantities.
方管框架按三视图拼装，节点逐处紧固，随后挂装防护网面。Assemble the square-tube frame according to the three-view drawings, secure each joint, and install the protective mesh.
门锁到位后接入地面设备，进行首轮联调与试飞验证。Secure the door lock, connect the ground equipment, and perform initial commissioning and flight validation.
参数以出厂规格书为准，如有特殊需求可联系我们定制配置。Specifications are subject to the factory specification sheet. Contact us for custom configurations.
